Bal Adhesives
Featured Products
2.5L
Coverage: Undiluted - 12.5m² - 25.0m²
Diluted 1:1 - 25.0m² - 50.0m²
May be tiled after 30 minutes.
BAL Prime APD is a rapid-drying acrylic primer suitable for priming wall and floor backgrounds prior to the fixing of ceramics, mosaics and natural stone tiles in dry or wet interior and exterior environments. BAL Prime APD stabilizes dusty surfaces and reduces the porosity of backgrounds and may be used undiluted on plaster walls and plasterboard, tongue and groove floorboards and anhydrite screed floors. Use diluted on plaster walls (if dusty or porous) and cement floors.
BAL Prime APD helps stabilize backgrounds prior to tiling in ultra-quick time, allowing for tiles to be fixed with a suitable adhesive in 15-30 minute and producing significant cost and time savings for your project. BAL Prime APD is suitable for a variety of projects including walls and floors, worktops, showers, heated screeds and areas with some movement or vibration.
USE FOR:
preparing floor and wall backgrounds prior to fixing of ceramic/mosaic and natural stone tiles
dry/wet – interior/exterior
USE UNDILUTED ON:
plaster walls/plasterboard when using a BAL cementitious powder adhesive
tongue & groove floorboards
anhydrite screed floors
USE DILUTED 1:1 with clean water on:
dusty/porous plaster walls when using a BAL ready-mixed adhesive
cement: sand screed/concrete floors
MAY BE TILED AFTER: 30 minutes